A push-pull forklift attachment is a material handling device designed to move long and heavy loads with ease. It is attached to the forklift and helps in pushing and pulling large and heavy loads, making the movement of goods from one place to another much easier. This attachment is especially useful for handling long and narrow loads such as pipes, steel beams, and sheets.
The push-pull attachment is made up of two arms that are attached to the forklift's tines. These arms can be extended to accommodate the length of the load being transported. The arms also have rollers on their ends that make it easier to move the load. The rollers can be adjusted to the desired height, making it possible to transport loads of different heights and sizes.
This attachment is easy to install and operate. It can be easily attached to the forklift and removed when not in use. The arms can be extended or retracted to accommodate the size of the load being transported. The attachment also comes with hydraulic control valves that make it possible to control the speed and direction of the load.
The push-pull forklift attachment is ideal for handling long and narrow loads such as pipes, steel beams, and sheets. It reduces the risk of damage to the load and the environment, as it allows for precise control over the movement of the load. The attachment also helps to increase productivity by reducing the amount of time and effort required to transport the load.
In conclusion, the push-pull forklift attachment is a useful tool for transporting long and heavy loads. It makes material handling easier, reduces the risk of damage to the load and the environment, and increases productivity. This attachment is a must-have for any company that handles long and narrow loads.
產品優勢
HUMAI forklift push/ pull forklift attachment with China Xinchai C490 engine, hydraulic transmission,USA EATON hydraulic assisted steering valve,SHIMADZU oil pump,full suspension chassis.It is widely used to handing all kinds of goods,such as pallet,steel,brick etc.Shantui has cooperated with KOMATSU more than 30 years,all the product was made under KOMATSU standard.
影片
發動機 | 模型 | 華美C490 | |
額定輸出 | 40/2650 | 千瓦/轉 | |
額定扭矩 | 165/1800 | N·米/轉 | |
氣缸數量 | 4 | ||
缸徑×衝程 | 90×105 | 毫米 | |
移位 | 2.7 | 大號 | |
外形尺寸 | 提升高度 | 3000 | 毫米 |
LxWxH（帶/不帶叉） | 3779（2709）x1226x2140 | 毫米 | |
轉彎半徑 | 2450 | 毫米 | |
桅杆傾角（F / R） | 6/12 | 學位 | |
性能 | 行駛速度（滿載/空載） | 19/20 | KM / H |
提升速度（有/無）負載 | 420/450 | 毫米/秒 | |
Max.gradeability | 20 | % | |
自重 | 4560 | 公斤 | |
車輪和輪胎 | 面前 | 28×9-15-14PR | |
後 | 6.50-10-10PR | ||
軸距 | 1700 | 毫米 | |
最小距離（桅杆） | 110 | 毫米 |
快速詳情
條件：新的
產地：中國廈門（大陸）
品牌名稱：華邁
型號：HUAMAI30
類型：動力托盤車
Power Souce：柴油發動機
額定載重量：3000kg
最大。提升高度：8000mm
閔。提升高度：3000mm
叉長：1070mm
叉寬：122mm
外形尺寸：3829x1226x2140mm
認證：ISO9001 / ISO14001 / CE
提供售後服務：工程師可在海外維修機械
Accseeory：推/拉
叉尺寸：1070 * 122 * 40mm
裝載中心：500毫米
輪胎：氣動
動力類型：柴油機
顏色：黃色
輪距：1700mm
電池：12V / 60Ah
油箱容量：50升
工作壓力：17.5Mpa
